Global 8 Ethernet Torque Tool Controller
Applications
Global 8 controllers work with up to eight PST 1000-equipped ported pulse tools, 1100-Series Exacta® 2 digital torque wrenches, 2.4 GHz preset torque wrenches or select battery-powered tools* - in any combination.
A large and readily-visible display assures the operator is always aware of the status of each tightening, the progress through each batch of fastenings, the correct tool for the currently-active fastener, and other information required to assure the fastening is properly performed.
The Global 8-Ethernet controllers all have Ethernet ports, and one of the four available communication protocols pre-installed at the factory. Available protocols include: Atlas Copco Open Protocol, Ethernet IP, PFCS, and ToolsNet. The lower display and keypad in the image at right provide a Human-Machine Interface for programming elements of the communication.
Further, these units all have relays and a port for connection to your 24 VDC control system, and are capable of fixed or variable sequencing if desired.
When multiple tools of multiple types, or many tools of the same type must be used at a single cell or station, one of the Global 8-Ethernet family of controllers is likely the optimum controller for that location.
Features and Specifications
| Feature | Global 8-Ethernet |
|---|---|
| Maximum number of torque tools controlled in any combination | Eight (8) on all models |
| Integrates 1100-Series Exacta® 2 Digital Torque Wrenches | Yes on all models |
| Integrates PST 1000 Pressure Sensor/Transceiver for ported pulse tools | Yes on all models |
| Integrates 2.4 GHz Wireless Preset Torque Wrenches | Yes on all models |
| Manages & communicates variable torque data | Yes for all (1100-Series Exacta required)s |
| Manages & communicates attribute torque data | Yes on all models |
| Downloads specifications to tools | Yes on all models (Battery tools excepted) |
| Performs task sequencing | Yes on all models |
| Accepts task sequencing from external commands | Yes on all models |
| Display shows current tool and current tightening status | Yes on all models |
| LED’s for Cycle Accept, Cycle Reject and Batch Accept | Yes on all models |
| 10-Pin I/O port for 24 VDC signals & relays | Yes on all models |
| Beeper augments visual communication | Yes on all models |
| Soft key programming on front panel | Yes on all models |
| 2.4 GHz RF communication distance up to 50’ (16m) | Yes on all models |
| Protocol preloaded | Yes on all models |
| USB connector for computer communications | Yes on all models |
| 14-character, 2-line Human-Machine Interface for Ethernet status | Yes on all models |
| RJ-45 Network connector | Yes on all models |
| 9-pin serial connectors for serial printer | Yes on all models |
| 9-pin serial connectors for bar code reader | Atlas Copco Open Protocol & ToolsNet only |
Ordering Information
| Part No. | Model | Description |
|---|---|---|
| 10477 | Global 8-Ethernet (ACOP) | Global 8 Controller with Ethernet card and Atlas Copco® Open Protocol |
| 10476 | Global 8-Ethernet (PFCS) | Global 8 Controller with Ethernet card and PFCS |
| 10473 | Global 8-Ethernet (Ethernet IP) |
Global 8 Controller with Ethernet card and Ethernet IP |
| 10494 | Global 8 Ethernet (ToolsNet) |
Global 8 Controller with Ethernet card and ToolsNet |
* Other protocols may be made available by special order. Contact us to discuss your needs.
Compatible Battery-Powered Tools: Panasonic EYFLA4AR, EYFLA5AR, EYFLA5QR, EYFLA6JR
Related Pages
Third-party software that performs data logging and facilitates programming tasks for Global 8 units can be found and downloaded here.
